This equipment supports 2 absolute encoders in input with a resolution of 360 positions/turn, in output 32 electronic cams auto protected against short-circuit and overload.
The linear advance function can be activated per cam and per benches; storage of 22 sizes selectable also remotely with binary code via PLC or contraves and 255 alarm messages selected also remotely with binary code via BMS interface.
The speed ratio enables the display of encoder turns to be multiplied or divided, which is used in case of multiple or two machines coupled on the same line.
If the encoder is disconnected or an output has short-circuited, a signal will indicate alarm status, in order for the machine to be stopped to prevent damage to mechanical or electrical devices.
Programming in five languages (Italian, English, French, German and Spanish) is easy to do manually on the on-board panel keypad or remotely via software.
The membrane keyboard and the aluminum front frame with shaped gasket protect the equipment and make it suitable for the harshest environments.
Cam programmer dimensions 196x99x140 mm according to DIN-43700.