This equipment supports an absolute encoder in input with a resolution of 360 positions/turn, in output 32 electronic cams auto protected against short-circuit and overload.
The linear advance function can be activated per cam; delay function for benches. Storage of 22 sizes with possibility of expansion up to 44, selected also remotely with binary code via PLC or contraves; 255 alarm messages selectable also remotely with binary code via BMS interface.
The 2 benches of cams ratio enable management from one programmer of several machines on a single line with different speeds
The speed ratio enables the display of encoder turns to be multiplied or divided, which is used in case of multiple or two machines coupled on the same line.
If the encoder is disconnected or an output has short-circuited, a signal will indicate alarm status, in order for the machine to be stopped to prevent damage to mechanical or electrical devices.
Programming in five languages (Italian, English, French, German and Spanish) is easy to do manually on the on-board panel keypad.
The membrane keyboard and the aluminum front frame with shaped gasket protect the equipment and make it suitable for the harshest environments.
Compatible with: Ite by Selet APX 2000, Cet DL1432, Cet DF1232, Cet D1024, Cet D1032, Cet D2016, Cet D2024, Cet D2032, Cet D3024, Cet D3032, Cet D4032.
Cam programmer dimensions 196x99x140 mm according to DIN-43700.