| Power
supply |
24
Vdc +/- 10% |
| Encoder data
input |
Incremental
- bidirectional 100 to 4000 imp. /rev.
Line Driver TTL (5Vdc) . Power supply 5Vcc o 10-30Vcc. |
| Max.
Speed |
4.000.000
impulse for minute |
| NO.
Size programmable |
8 |
| NO.
output |
8
output - 4 phase each output |
| V
out |
24Vdc
with survoltage 60V per 7ms |
| I
out |
2.5A
each output (electrovalve load) |
| Logic
Output |
8
outputs 24Vdc
PNP - 50mA short circuit protected |
| Phase
program |
millimeter |
| Setting
of speed compensation |
Advance
settable in start/end of each phase (1-210mSec) |
| Trigger
input |
4
indipendent positive logic input or PUSH-PULL 24Vdc |
Setting of
encoder gearing ratio
(impulse/millimeters) |
indipendent
for each output |
| Setting
for OFF-SET on trigger (mm) |
1
OFF-SET indipendent for each output |
| Size
selction from PLC or contraves |
binary
logic 24Vdc PNP |
| Short-circuit
alarm output |
Relč |
| Safety key |
in-panel |
| Outputs
stop for low speed |
settable
in R.P.M. |
| RS232
for comunication PC |
on
board |
